Selecting Outboard Motor (Triple Engine) - Yamaha F300A Owner's Manual

shut-off switch.
EMU35880
Selecting outboard motor
(triple engine)
After all engines have started, set all control
levers to Neutral. Push the engine selector
switch repeatedly to change the digital elec-
tronic control-active indicator and select the
desired engine.
1
3
1. Port side control lever
2. Starboard side control lever
3. Port side engine
4. Center engine
5. Starboard side engine
1. First, three engines can be operated.
TIP:
When all engines have started, the center
engine will run at the average speed of port
side and starboard side engines' speeds.
2
S
P C
4 5
ZMU05998
Operate the port side engine using the port
G
side control lever.
The center engine runs at the average
G
speed of port side and starboard side en-
gines' speeds.
Operate the starboard side engine using
G
the starboard side control lever.
2. Push the engine selector switch once to
operate the port side and starboard side
engines.
Operation
ZMU05999
ZMU06000
ZMU06001
57