Low Oil Pressure-Alert; Overheat Alert - Yamaha F300A Owner's Manual

TIP:
Trolling is affected by currents and other
G
operating conditions and may differ from
the actual engine speed.
The default engine idle speed is reset au-
G
tomatically when the display is switched to
the normal display. The default engine idle
speed is also reset automatically when the
engine is turned off or when the engine
speed exceeds 3000 r/min.
When warming up a cold engine, the troll-
G
ing speed cannot be decreased below the
specified engine idle speed.
EMU36130

Low oil pressure-alert

If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatical-
ly decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indica-
Instruments and indicators
tor blinks. Check the engine oil quantity and
replenish oil if necessary. If the alert device
has activated while the appropriate engine
oil quantity is maintained, consult your
Yamaha dealer.
ECM01601
NOTICE
Do not continue to run the engine if the
low oil pressure alert device has activat-
ZMU05931
ed. Serious engine damage will occur.
EMU36221

Overheat alert

If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink. The engine speed will automatically
decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01592
NOTICE
Do not continue to run the engine if the
G
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
G
a alert device has activated. Consult
your Yamaha dealer if the problem can-
ZMU05430
not be located and corrected.
ZMU05421
35