Menu Selection Screen - Exmark LZS850EKA724W0 User Manual

the operator to reset the PTO switch by turning it
"OFF" (pushed down) and then turning it "ON".
•
Operator must be in seat when PTO is engaged,
brake is disengaged, or motion control levers are
moved in or engine will stop.
•
Engine will stop if either the left, the right, or both
levers are moved from neutral lock position while
brake is engaged.
Note:
Refer to the Operator's manual, provided
with the machine, to check the safety interlock
system.
Engine Temperature
A bar graph will display the engine temperature. When
the temperature is high and approaching an overheat
condition, the bar graph will flash. When the engine
has overheated, the bar graph will be completely filled.
Engine RPM
Displays the RPM of the engine.
Fuel Level (if fuel sender is available)
The fuel level is shown on a bar display. An error
appears when the fuel level is low (approximately one
gallon remaining in the tank).

4.5 Menu Selection Screen

The system will enter the Menu Selection Screen
when the motion control levers are placed in the
neutral lock position and the two LDU outside push
buttons are pressed and held down.
1. Outside push buttons
7
Figure 6
2. Menu selection screen
g038652