Exmark LZS850EKA724W0 User Manual page 15

1. Engine settings
Pressing the up arrow will increase the engine speed
while pressing the down arrow will decrease the
engine speed. Pressing the enter button confirms the
speed and automatically moves the user to the next
screen/engine speed set point.
1. Engine settings
2. Set low mow speed
3. Engine speed set point
(e.g. 3600)
The system will not allow the following to occur:
•
The efficient speed can not be set higher than the
max speed.
•
The low speed can not be set higher than the
efficient speed.
Note:
The user can set the max=efficient mow speed
to use the efficient mode while mowing.
5.3.6 Calibrate Engine Speed Command
Output
The screens allows the calibration of the actual engine
speed to match the commanded engine speed. The
enter button will be blacked out if the "safe to start"
mode (blades disengaged, park brake engaged,
motion controls in neutral lock) is not met. Once the
"safe to start" is met, press the enter button to start
the calibration process.
Figure 34
2. Adjust engine speeds
Figure 35
4. Up arrow–Increase
5. Enter/Return
6. Down arrow–Decrease
g030227
1. Calibrate engine settings
An animated hourglass will appear indicating the
calibration is in process.
1. Calibrate engine speed
2. Calibrating
g030228
Once the calibration is complete, the user can toggle
back to the primary calibrate engine speed screen.
1. Calibration engine speed
2. Calibration complete
5.3.7 Reset Options Back To The Factory
Default Settings
The factory defaults screen allows the user to reset
system settings back to the factory default settings.
Pressing the enter button brings up confirmation
screen – Y (yes) to reset or N (no) to cancel.
Note:
Resetting the system will return the engine
speed settings and alarm settings back to the factory
default settings.
15
Figure 36
2. Start calibration
Figure 37
3. Processing
Figure 38
3. Toggle between screens
g030234
g030235
g030237