Canon N1000 User Manual page 94

Solution:
Problem 2: A problem has occurred with the ink tank.
Solution:
x Ink Check
Problem 1: Ink in the ink tank of the displayed color (x = Y, M, C, Bk) is running low.
Solution:
Ext. I/F Error
Problem 1: An error occurred during data transfer at the network interface board.
Solution:
Cover Open
Problem 1: The cover named in the second line of the printer operation panel display
Solution:
Media Misfeed
Problem 1: Paper or other print media did not feed.
Solution:
Problem 2: Paper has jammed in the printer.
Solution:
Problem 3: The job is printing from the tray or Cassette 1 with the manual feed lever
Solution:
Problem 4: Transparency sheet (OHP film) could not feed from the paper cassette.
Solution:
6-12
Troubleshooting
Read the message and select the correct color ink tank for replacement.
Make sure that the ink tank is installed correctly. ( P.5-2)
Install a new ink tank. ( P.5-2)
Read the message and select the correct color ink tank for replacement.
Make sure that the new ink tank is installed correctly.
Press the Online button. However, the print job data stream cannot be
printed.
is open.
Close the appropriate cover.
Remove the sheet or stack, load it again, then press the Online button.
( P.2-7)
Remove the jammed sheet. ( P.6-15)
raised.
Lower the manual feed lever. ( P.2-15)
Place 1 sheet of plain paper under the bottom transparency, then set the