Alarm Connections - Bosch VIP XD Installation And User Manual

EN | 52
Installation and User Guide | VIP XD
Alarm sources
You can configure the alarm inputs on the VIP XD here.
Alarm input 1 ... Alarm input 4:
Select the option On in order to activate the alarm via the corresponding external
alarm sensor. Otherwise, select Off.
Select Active high if the alarm is to be triggered by closing the contact. Select
Active low if the alarm is to be triggered by opening the contact.
Name:
For easier identification, you can enter a name for each alarm input.

Alarm connections

You can select the response of the VIP XD in case of an alarm. In case of an
alarm, the VIP XD can automatically establish a connection to a predefined IP
address (compatible MPEG-4 compatible video server). You can enter up to ten
IP addresses which will be selected in order by the unit in case of an alarm until
a connection is established.
Connect on alarm:
Select On so that the VIP XD automatically establishes a connection to a pre-
defined IP address in the event of an alarm.
Configuration using a Web Browser Bosch Security Systems | 2005-05 | V1.0