Network Settings - Bosch VIP XD Installation And User Manual

VIP XD | Installation and User Guide

Network settings

Here, you can specify network addresses and configure multiple connections.
Network
The settings on this page are used to integrate the unit into an existing network.
Warning!
Changes to the IP address, subnet mask or gateway address are
transferred to the unit by clicking Set. However, they only take effect after
the unit is restarted.
– Click Set after entering a new IP address.
– To do this, enter the old IP address followed by /reset (for instance
192.168.0.80/reset) in the address bar of your web browser. The
VIP XD will be restarted, after which it can only be accessed at the new IP
address.
Unit IP address:
Enter the desired IP address for the VIP XD in this field. The IP address must be
valid for the network.
Subnet mask:
Enter the appropriate subnet mask for the set IP address here.
Bosch Security Systems | 2005-05 | V1.0
EN | 39
Configuration using a Web Browser