Removing The Network Board - Canon LASER SHOT LBP-2410 User Manual

8
9
10
6

Removing the Network Board

Remove the network board in the following procedure. Have available the protective
plate and screws of the expansion board slot that was removed when the network
board was installed.
CAUTION
•
Be sure that the printer is OFF, and that all interface cables and power cord are
disconnected. Replacing with the power ON or cables and wires connected may
result in an electrical shock.
•
Be careful when handling the network board. Touching the edges or the sharp
portion of the network board may result in personal injuries.
6-16 Installing the Network Board (AXIS 1611)
Connect the power cord and all interface cables.
Press the power switch to turn the printer ON.
Confirm that the Power lamp on the network board is
illuminated.
Power lamp