Table of Contents
Advertisement
1MRS750500-MUM
1.
1.1.
1.2.
1.3.
1.4.
1.5.
Feeder, Machine and Transformer Terminals
Operator's Manual
About this manual
Copyrights
The information in this document is subject to change without notice and should not
be construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for
any errors that may appear in this document.
In no event shall ABB Oy be liable for direct, indirect, special, incidental or
consequential damages of any nature or kind arising from the use of this document,
nor shall ABB Oy be liable for incidental or consequential damages arising from
use of any software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without written
permission from ABB Oy, and the contents thereof must not be imparted to a third
party nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
Copyright © 2005 ABB Oy
All rights reserved.
Trademarks
ABB is a registered trademark of ABB Group.
All other brand or product names mentioned in this document may be trademarks or
registered trademarks of their respective holders.
Guarantee
Please inquire about the terms of guarantee from your nearest ABB representative.
General
This document, Operator's Manual for RE_ 54_, instructs how to use the graphic
HMI of the REF 54_, REM 54_ and RET 54_ terminals.
Please note that the HMI views in the pictures of this manual are exemplary.
Document revisions
Version Date
History
G
3.5.2002
Section "IRF test" added
H
4.6.2003
Section "Emergency stop function" added
Text added to sections "Self supervision (IRF)" and "Main window"
H
25.3.2004 Layout changed
H
25.5.2004 Layout changed
K
15.8.2004 Text and pictures updated throughout the manual
M
20.01.2005 RET 54_ Transformer terminal added to the manual
Pictures updated
RE_ 54_
5
Advertisement
Table of Contents
