Table of Contents
Advertisement
RE_ 54_
4.1.3.
10
Feeder, Machine and Transformer Terminals
Operator's Manual
increase
and
Push
decrease
Fig. 4.1.2.-1
Adjusting display contrast
The user can also adjust the contrast by setting the "Contrast" parameter in MAIN
MENU/Configuration/MIMIC [17].
Provided the user stores the selected contrast tuning value in the non-volatile
memory (refer to section "Saving parameters" on page 26), the contrast is
automatically adjusted according to the set value after power cycling of the terminal.
Selecting language
MAIN MENU
MAIN MENU
Status
Protection
Control
Cond. monit.
Measurement
Communication
General func.
Tests
Information
Configuration
Fig. 4.1.3.-1
Selection of language
To change the display language
1. In the MIMIC view at user level, press [E] for 2 s and enter the password to
access the technical level
2. Press [
] or [
] to select Configuration (last item) in the MAIN MENU
↑
↓
3. Press [
] to move to the Configuration menu
→
4. The cursor is at the first menu item, Languages, so you can move to the
Language menu by pressing [
5. Press [
] to move the cursor to the desired language
↓
6. Confirm the selection by pressing [E]
• After confirmation, the cursor automatically returns to the MAIN MENU
For more information about saving the parameters, please refer to section "Saving
parameters" on page 26.
GROUP MENU
PARAMETER MENU
Configuration
Languages
]
→
1MRS750500-MUM
conadj_b
Confirm
Languages
English
Cancel
langusel_b
Advertisement
Table of Contents
