Object Control In The Mimic View - ABB RE 54 Operator's Manual

RE_ 54_
4.2.3.
14
Feeder, Machine and Transformer Terminals
Operator's Manual
Table 4.2.2-1 Control position button (Continued)
DISABLED
mode
LOCAL mode
REMOTE mode
The configuration has to contain the Logic Control Position Selector
!
function (COLOCAT) to allow LOGIC position to be selected with the
[R\L] button (refer to the CD-ROM Technical Descriptions of Functions,
1MRS750889-MCD).
Local Remote
Fig. 4.2.2.-1 Control position selection sequence when LOGIC position is
selectable (COLOCAT function used in configuration)
Local Remote
Fig. 4.2.2.-2 Control position selection sequence when LOGIC position is not
selectable (COLOCAT function not used in configuration)

Object control in the MIMIC view

Objects can be controlled with the [select], open [O] and close [I] buttons (see table
below). A selected object remains highlighted until a control command is given or
the time-out has elapsed. The user can adjust the time-out in MAIN MENU/
Control/General/Select timeout.
• DISABLED mode is enabled
L
R
• LOCAL mode is enabled
• REMOTE mode is disabled
L
R
• REMOTE mode is enabled
• LOCAL mode is disabled
L
R
Disabled Logic
Disabled
1MRS750500-MUM
rlconsq_b
rlconsq3_b