Table of Contents
Advertisement
SMA America, LLC
Decommissioning
9. Remove the screws left and right on the SMA DC
Disconnect which attach it.
11.2 Packaging
If possible, always pack the Sunny Boy and the SMA DC Disconnect in the original packaging. If this
is no longer available, use a similar box with a handle system which can withstand the weight of the
Sunny Boy and the SMA DC Disconnect and can be closed fully.
11.3 Storage
Store the Sunny Boy and the SMA DC Disconnect in a dry place where ambient temperatures are
always between − 13 °F ... +140 °F ( − 25 °C ... +60 °C).
11.4 Disposal
Dispose the Sunny Boy and SMA DC Disconnect at the end of its service life in accordance with the
disposal regulations for electronic scrap which apply at the installation site at that time. Alternatively,
send it back to SMA with shipping paid by sender, and labeled "FOR DISPOSAL" (contact: see
Page 71).
Installation Guide
SB8-10TL-IUS103811
59
Advertisement
Table of Contents
