Programming Menu - Honeywell Notifier LCD6000N Installation Manual

PROGRAMMING MENU'

To enter in the initial configuration programming menu of the LCD6000N, hold the
To change the panel configuration the 3A password level is required. To access the password level 3A
press for a wile then the entering windows will displayed. With arrow keys
than press to confirm. Repeat this step to enter the entire password.
The following menu will displayed:
Where:
Address
Select "Address" voice to assign peripheral number to LCD6000N.
Use arrow key to select device number and press list key
LCD6000N.
PAGE - 8
NOTIFIER ITALIA
to confirm. 16 available device address for
Installation Manual
Doc. M-183.1-LCD6000N-ENG Rev A.2
key for a wile.
select first number,
Use arrow keys 
To select the function
to change and press list key
to confirm and access to
the function.
LCD6000N
LCD6000N_manu