All manuals and user guides at all-guides.com
I/O Drive - Installation Guide
Installation for Volvo KAD 32
Note: You must use the KAD 32 I/O drive unit (part number E12019)
for this system.
Volvo KAD 32 installation kit
When installing the I/O drive unit on a Volvo KAD 32, the first step is
to fit an extension bracket to raise the engine filter assembly and
provide sufficient space for the drive unit (see Figure 14):
1. Remove the KAD 32 bracket bolts
2. Lift the filter/bracket assembly clear of the engine.
3. Remove the filter assembly bolts.
4. Fit the extension bracket (supplied) to the KAD 32 bracket using
5. Use the filter assembly bolts to attach the filter assembly to the
6. Make sure the flexible hose is secure.
7. Use the KAD 32 bolts to refit the complete filter/bracket
Securing
bolt (x2)
Shakeproof
washer (x2)
Girdle support
bracket
the extension bracket bolts (supplied)
extension bracket.
assembly.
Volvo adaptor pin
Extension bracket
Split pin (x2)
15
Extension bracket bolt,
washer and nut (x2)
D5212-1