Switching Input Signal; Hiding The Image; Remote Paging Operations; Freezing The Image - BenQ CP120C User Manual

Switching input signal

The projector can be connected to multiple devices
at the same time. However, it can only display one at
a time. To cycle through the available input sources,
press the SOURCE button. A source selection menu
will display at the center of the screen after you press
the button.
The brightness level of the projected image will
change accordingly when you switch between
different input signals. Data (graphic) "PC"
presentations using mostly static images are
generally brighter than "Video" using mostly moving
images (movies).
The input type affects the options available for the Application Mode. See
application mode" on page 25

Hiding the image

In order to draw the audience's full attention to the
presenter, you can press the BLANK (or BLANK /
5Up) button to hide the screen image. Press the
button again to restore the image. The word
"BLANK" appears at the bottom right corner of the
screen while the image is hidden.
You can set the blank time in the
> Blank Time
image automatically after a period of time when
there is no action taken on the blank screen.
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.

Remote paging operations

You can operate your display software program (on a connected PC)
which responds to page up/down commands (like Microsoft PowerPoint)
by pressing Page Up and Page Down on the remote control
"Connecting a computer" on page 16
Connect the projector to your PC or notebook with a USB cable
prior to using this function.

Freezing the image

Press the Freeze button on the remote control to freeze the image. An
icon will display in the lower right corner of the screen. To
release the function, press the Freeze button on the remote control,
or the SOURCE button.
This does not remotely control the signal source. It just freezes the
currently projected image.
26 Using the projector
for details.
menu to let the projector return the
for details.
Advance --
. See
"Selecting an