Controls And Functions; External Control Panel - BenQ CP120C User Manual

Controls and functions

External control panel

1. Zoom ring (Refer to
information)
Adjusts the size of the projected image. Rotate clockwise to enlarge the image or rotate
counter-clockwise to reduce the image size.
2. TEMPerature warning light (Refer to
Flashes red if the projector's temperature becomes too high.
3. POWER indicator light (Refer to
Lights up or flashes when the projector is under operation.
4. BLANK/5Up button (Refer to
on page 29
Press this button to hide the screen image. You can press this button again to bring the
image back.
When the on-screen menu is activated, press this button to move the selection focus
up.
5. Power button (Refer to
information)
Turns the projector on or off.
When the projector is in standby, press once to turn the projector on.
When the projector is on, press twice to switch the projector to standby.
8 Introduction
1
2
3
4
5
6
7
8
"Fine-tuning the image size and clarity" on page 24
"Indicators" on page 41
"Hiding the image" on page 26
for more information)
"Start up" on page 21
"Indicators" on page 41
for more information)
and "Shutdown" on page 27
9
10
11
12
13
for more
for more information)
and "Using the menus"
for more