Table of Contents
Advertisement
What is the Carrier Connect™ 33CONNECTSTAT43FX Thermostat?
The Carrier Connect 33CONNECTSTAT43FX thermostat has:
•
Space and remote temperature sensing
•
Space and remote humidity sensing
•
BACnet MS/TP communications
•
Wi-Fi connectivity
The Carrier® Connect™ Wi-Fi Thermostat package includes:
•
Thermostat
•
Mounting Hardware - two screws with drywall anchors and one security screw
•
Quick Start Guide - Catalog No. 11-808-873-01
Some of the features:
•
Control of heating, cooling, and fan solid state 24 Vac outputs
•
Space temperature sensing (> 0.5°F accuracy from 60°F to 90°F)
•
Outdoor temperature sensing using a 10K @ 25°C J Curve (type II) thermistor connected to T and C terminals
or Wi-Fi outdoor temperature, available by GPS location services, determined when the thermostat is installed
•
Humidity sensing and control
•
Remote humidity sensing from a 33ZCSENDRH-02 Humidity Duct Sensor or 33ZCSENSRH-02 wall sensor
•
Wi-Fi connectivity (supports 802.11 a/b/g/n standards and utilizes a Broadcom chipset)
•
Cloud Connectivity using the Carrier Connect mobile app (iOS and Android).
•
Optimized installation ("finger friendly" spring-loaded connectors that accept 16 to 24 AWG wire and NO
screwdriver required for wire insertion and removal)
•
Optimized boot time (5 seconds total boot time until temperature displays and thermostat is fully operational)
•
4.3" segment display
•
Thirteen touch points for display buttons
•
OTA functionality (reprogrammable via Wi-Fi)
Carrier Connect™ Wi-Fi Thermostat 33CONNECTSTAT43FX
Installation Guide
1
CARRIER CORPORATION ©2021
All rights reserved
Advertisement
Table of Contents
