Table of Contents
Advertisement
Setting
HUMIDIFY SETPOINT—Sets the humidify setpoint. When the heating equipment is
energized and the humidity level is more than 2% below the humidify setpoint, the
humidifier turns on.
When the heating equipment turns off or the humidity level is more than 2% above the
humidify setpoint, the humidifier turns off.
NOTES
•
If the installer set HUMIDIFIER to NO, this setting is not available.
•
If the installer did not set the HUM OUTPUT to 1 of the 3 configurable outputs, this
setting is not available.
DEHUMIDIFY SETPOINT—Sets the dehumidify setpoint. When the humidity level is greater
than the dehumidify setpoint, dehumidification operates according to the installer
configuration for the dehumidifier.
NOTE If cooling equipment is not available (based on the OUTDOOR EQUIPMENT TYPE
selection, then dehumidification is not available in the thermostat.
HOLIDAYS—View or edit all holidays for the current year. When the current date in the thermostat is the same as a day in the
holiday list, the setpoints for the first UNOCCUPIED time range are used for the entire day unless you later change them.
When the HOLIDAYS screen displays, press SELECT to view the holidays. The up and down arrows scroll through the
holidays, displaying one per screen.
Maximum number of holidays in the holiday list is 24.
There are two different holiday formats.
•
Standard holidays are the same every year, such as Jan 1st and Dec 25th.
•
Special holidays are occurrences of a day of the week such as Memorial Day, Labor Day, and Thanksgiving. The day of
the week is shown in the heat setpoint location.
•
For both types of holidays, the duration of the holiday is shown in the cool setpoint location.
•
The top banner scrolls the holiday details.
To program holidays:
•
Press SELECT to display the SAVE and CANCEL buttons
•
When the month flashes, use the up and down arrows to change it.
•
To change the day of the month, touch the screen location that shows the day of the month and it flashes.
•
To change the duration, touch the duration value and it flashes.
•
To delete a holiday, set the duration field to zero and press SAVE. The banner scrolls DELETE HOLIDAY.
•
To add a holiday, scroll through the list of holidays to the end. The last entry is the ADD HOLIDAY screen. Press SELECT
to add a new holiday. The new holiday is initialized to 1/01 with a duration of one day.
•
The day of the month advances from 1 to the last day of the month and then Su, Mo, Tu, We, Th, Fr and Sa, and then
back to 1. When the days of the week are displayed, an occurrence value is shown in the heat setpoint. This allows the
user to enter a special holiday.
NOTE If the thermostat has been configured for non-programmable operation, the HOLIDAY screen is not available in the
Menu settings.
Carrier Connect™ Wi-Fi Thermostat 33CONNECTSTAT43FX
Installation Guide
25
Using the menu for advanced features
Default/Range
D:
15%rh
R:
15 – 5%rh
D:
65%rh
R:
35 to 65%rh
CARRIER CORPORATION ©2021
All rights reserved
Advertisement
Table of Contents
