Table of Contents
Advertisement
During the Auto mode, The unit operates in dehumidifying mode when the room temperature is between 68
73
°
F. The unit operates in cooling mode when the room temperature is above 73
with the Auto mode.
SLEEP MODE
(This mode can only be programmed from the remote control.)
1. The air conditioner will need to be in operation.
2. Press the Sleep button. The "
3. The fan motor runs at low speed.
4. When in cooling mode, the temperature will increase 1
temperature will stay 2
shut down.
5. When in dehumidify mode, the temperature will not change.
NOTE: If the unit is turned off during cooling, dehumidifying, or heating and then restarted, there will be a 3 minute delay
before the compressor will turn back on to prolong the life of the compressor. Once the power recovers and the
compressor restarts, the unit will return to the original working mode.
REMOTE CONTROL & OPERATION (PAC15/18 ONLY)
The remote control provided with the unit can be used to operate the portable air conditioner. The remote control uses
2 AAA batteries (provided). Install the batteries before using the remote control.
The remote control can be used to do all the operations that can be programmed from the control panel.
The LCD display on the remote control can show either Celsius or Fahrenheit. Press the + and - keys simultaneously
to change the display from Celsius to Fahrenheit or vice versa.
" icon appears on the multi-colour display.
°
F higher than the originally set temperature for 6 hours. 6 hours later, the unit will
14
°
F per hour during the first two hours. Then the
°
F -
°
F. You may use the timer
Advertisement
Table of Contents
