Auto Mode; Sleep Mode - Soleus Air PH1-12R-03 Owner's Manual

AUTO MODE
l. Properly install the exhaust hoses.
2. Plug the power cord into a grounded outlet.
3. Turn on the unit by pressing the On/Off button on the control panel.
4. Press the Mode button until the "_" icon appears on the multi-color display.
5. Press the Fan button to select the fan speed.
o
During the Auto mode, the unit operates in heating mode when the room temperature is belowo 68 F.
The unit operates in dehumidifying mode when the room temperature is between 68 F - 73 F. The
unit operates in cooling mode when the room temperature is above 73 F. You may use the timer with
the Auto mode.
SLEEP MODE
(This mode can only be programmed from the remote control.)
1. The air conditioner will need to be in operation.
2. Press the Sleep button. The" _}2k " icon appears on the multi-color display.
3. The t:an motor runs at low speed.
4. When in cooling mode, the temperature will increase I°F per hour during the first two hours. Then
the temperature will stay 2°F higher than the originally set temperature for 6 hours. 6 hours later,
the unit will shut down.
5. When in heating mode, the temperature will decrease I°F per hour during the first two hours. Then
the temperature will stay 2°F lower than the originally set temperature for 6 hours. 6 hours later, the
unit will shut down.
6. When in dehumidify mode, the temperature will not change.
NOTE: If the unit is turned off during cooling, dehumidifying, or heating and then restarted, there will be a 3
minute delay before the compressor will turn back on to prolong the life of the compressor. Once the power
recovers and the compressor restarts, the unit will return to the original working mode.
13