Cleaning And Care - Vitek VT-2230 Manual Instruction

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
IMPORTANT: do not keep the plates on the same area
of the hair lock for more than 2 seconds.
After that start straightening the next hair lock.
Cool your hair down before final styling or applying
hair spray.
Avoid contact of heated surfaces with your face, neck
and other parts of your body.
After you finish using the unit press and hold the on/
off button «
on the display (2); unplug the unit. Let the unit cool
down.
Note:
– Always switch the unit off and unplug it if it is not
used.
– Do not leave the unit connected to the mains unat-
tended, if you forgot to switch the unit off, it will be
switched off automatically in 60 minutes, the «OFF»
symbols will appear on the display (2), if you did
not unplug the unit, the «OFF» symbols will go out
in 5 minutes.

CLEANING AND CARE

Before cleaning, unplug the unit and let it cool down
completely.
Never immerse the unit into water or other liquids.
Wipe the heating plates and the unit body with a soft
damp cloth and then wipe them dry.
Do not use steam cleaners.
Do not use abrasive cleaners and solvents to clean
the unit.
STORAGE
Always unplug the unit if it is not being used.
Let the unit cool down completely before taking away
for storage.
Never wind the power cord around the unit, as it can
damage the cord.
For easy storing press the heating plates together
and move the clamp (6) to the position «
You can store the unit hanging it by the loop (5) pro-
vided that no water gets on it in this position.
Keep the unit in a dry cool place out of reach of chil-
dren and disabled persons.
ENGLISH
» (4), the «OFF» symbols will appear
7
».

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt-2246

Table of Contents