Ryobi OBS1815 Manual page 7

1
Always wear safety goggles or safety
glasses with side shields
operating the product. Wear non-skid,
protective footwear that will protect
your feet and improve your footing on
slippery surfaces.
4
1
Loosen the tank lid and remove it from
the tank.
7
1
2
Raise the battery cover, and install
the battery pack. Make sure that the
latches on each side of the battery pack
click in place.
2
2
Insert the spray wand into the trigger
when handle. Slide the nut onto the threaded
coupling and hand tighten securely.
5
2
Fill the tank with the required amount
of liquid (up to 15L).
8
Wear the product on your back.
3
1
Install either the flat fan nozzle or cone
spray nozzle and tighten.
6
1
2
Place the tank lid back onto the tank
and tighten.
9
Insert the harness buckle to the
harness latch until it clicks. Pull both
ends of the harness to tighten.
1
2
2
1
Getting started
4
7
7