Technical Data; Definitions: Safety Guidelines - Stanley FATMAX SFMCPS620 Instruction Manual

POLE SAW
SFMCPS620
Congratulations!
You have chosen a tool. Years of experience, thorough product
development and innovation make one of the most reliable
partners for professional power tool users.

Technical Data

Voltage
Battery type
Bar Length
Maximum Chain Speed (no-load)
Maximum Cutting Length
Oil Capacity
Weight (without battery pack)
Noise values and vibration values (triax vector sum)
according to EN ISO 11680-1:2011.
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN ISO 11680‑1:2011 and may be
used to compare one tool with another. It may be used for a
preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
Battery
Cat #
SFMCB202
SFMCB204
SFMCB206
SFMCPS620
V
DC
cm
m/s
cm
ml
kg
dB(A)
dB(A)
dB(A)
m/s 2
m/s 2
Charger
Output
Voltage
SFMCB12
18 X
18 X
18 X
"X" Indicates that the battery pack is compatible with that
specific charger. Read the instruction manual for more
specific information.
EC-Declaration of Conformity
Machinery Directive
18
Pole Saw
Li-Ion
SFMCPS620
20
STANLEY FATMAX declares that these products described under
1.9
Technical Data are in compliance with:
15
2006/42/EC, EN 62841‑1:2015; EN ISO 11680‑1:2011, 2000/14/
40
EC , Annex V DEKRA Certification B.V., Meander 1051 / P.O. Box
5185 6825 MJ ARNHEM / 6802 ED ARNHEM Netherlands
3.5
Notified Body ID No.: 0344
LWA (guaranteed sound power) 94 dB(A)
LPA (measured sound pressure level) 78 dB(A)
78 Uncertainty for sound pressure level, K= 2,5 dB(A)
These products also comply with Directive 2014/30/EU
89.5
and 2011/65/EU. For more information, please contact
3,9
STANLEY FATMAX at the following address or refer to the back
of the manual.
<2,5
The undersigned is responsible for compilation of the technical
1,5
file and makes this declaration on behalf of STANLEY FATMAX.
A. P. Smith
Technical Director
STANLEY FATMAX Europe, Egide Walschaertsstraat14‑18,
2800 Mechelen, Belgium
30.08.2019
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
English
5