Protecting The Environment - Stanley FATMAX SFMCPS620 Instruction Manual

attachments or accessories. An accidental start-up
can cause injury.Regular maintenance ensures a long
effective life for the tool. After every 10 minutes of use
be sure to remove the battery (be aware the chain and
bar can be hot!) check the bar and chain for correct
tension and lubricate per Adjusting Chain Tension and
Chain Oiling.
Lubrication
Your power tool requires no additional lubrication.
Cleaning

WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Optional Accessories

WARNING: Since accessories, other than those offered
by , have not been tested with this product, use of such
accessories with this tool could be hazardous. To reduce
the risk of injury, only recommended accessories should
be used with this product.
Consult your dealer for further information on the
appropriate accessories.
Replacement chain and bar are available from your
nearest sTAnlEY FATMAX service center.
• SFMCPS620 requires replacement chain service part
number STZCS220 . Replacement 20 cm bar, service part
number STZCS1220.

Protecting the Environment

Separate collection. Products marked with this symbol
must not be disposed of with normal household waste.
Products contain materials that can be recovered
or recycled reducing the demand for raw materials.
Please recycle electrical products according to local provisions.
Further information is available at www.2helpU.com.
Guarantee
1 Year Guarantee
All STANLEY FATMAX power tool products include a 1 year
guarantee as standard. In the unlikely event that your powertool
becomes defective due to faulty materials or worksmanship
within 1 year of purchase, STANLEY guarantees to replace or
repair all defective parts free of charge, or – at our discretion –
replace the item free of charge.
3 Year Guarantee
Register your STANLEY FATMAX power tool within 4 weeks
of purchase and qualify for an additional 2 year guarantee.
Having registered your power tool, in the unlikely event that
your powertool becomes defective due to faulty materials or
worksmanship, STANLEY guarantees to replace or repair all
defective parts free of charge, or – at our discretion – replace
the item free of charge.
English
17