Toro Reelmaster 2300-D Service Manual page 183

Fixed Side Plate Installation (Fig. 28 and Fig. 29)
1. Remove pop rivets and rear height–of–cut plates
from both sides of the cutting unit (Fig. 28).
2. Remove lock nuts, capscrews, washers, and both
links from the cutting unit (Fig. 28).
3. Align fixed side plate with holes on the cutting unit
(Fig. 29).
4. Attach new capscrews, washers, and flanged lock
nuts to the fixed side plate and the cutting unit (Fig. 29).
5. Tighten lock nuts and capscrews
6. Fasten new height–of–cut plate to the cutting unit
with new pop rivets (Fig. 29).
7. Repeat steps 1. through 6. for the other side of the
cutting unit.
Reelmaster 2300–D/2600–D
1. Pop rivet
2. Height–of–cut plate
3. Lock nut
1. Fixed side plate
2. Capscrews
3. Washers
Page 7 – 25
2
6
1
3
5
Figure 28
4. Capscrew
5. Washer
6. Link
5
1
6
4
2
Figure 29
4. Flanged lock nut
5. Height–of–cut plate
6. Pop rivet
Cutting Units
4
3