Power Sprayer Handle Assy Adjustment; Power Sprayer Wheel Installation - Peco PS5 Operator's Manual

Power Sprayer Handle Assembly Adjustment
The Power Sprayer Handle Assembly P#(A2377) position can be adjusted to lower or raise the Handle by moving the
(2) Locator Pin Nuts P#(B4251) to the different set of holes. See Figure A below.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Locator Pin
Handle Assembly
Adjustment Holes
to Locator Pin
Sprayer Wheel Installation
Before installing the Sprayer Wheels (Item #1), install the Axle (Item #2) by passing it through the through hole of
both the Left & Right Chassis. Refer to Figure A.
Next, place a Spacer Bushing (Item #3) on either side of the Axle outside of the Left & Right Chassis.
Once, the Spacer Bushing is in place, slide the Sprayer Wheel over the Axle and secure the Sprayer Wheel by using
(1) 5/8" Push Nuts (Item #4) PER side. Refer to Figure A below.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure B
9