Table of Contents
Advertisement
Section II - INSTALLATION FOR USE
Sprayer Pump Installation
Align and position the Sprayer Pump (Item #2) to the (4) mount holes on the Chassis Body (Item #1) as shown in
Figure A. Secure the Sprayer Pump by using (4) #10-12 Flat Tinnerman Nuts (Item #3) and (4) #10-12 x 3/4" Blunt Tip
Sheet Metal Screws (Item #4). Refer to Figure A.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Battery Installation
Position the Power Sprayer Battery (Item #1) vertically, as shown in Figure A, to the right side of the Sprayer's
Chassis Body (Item #2). Secure the Power Sprayer Battery by using (1) Battery Clamp (Item #3), (1) 1/4"-20 x 4-1/2"
Carriage Bolt (Item #4), (1) Heavy Washer (Item #5) and (1) 1/4-20" Wing Nut (Item #6). Refer to figure B.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure B
5
Advertisement
Table of Contents
