Table of Contents
Advertisement
Component Top Installation
With the pre-installed Tinnerman Clip (Item #4) onto the Chassis Body (Item #1) and the Component Back (Item #2),
install the Aluminum Component Top (Item #3) by aligning the Top over the Chassis Body and the Component Back
by securing the Top by using (4) #10-12 x 1/2" Tinnerman Screws (Item #5). Refer to the Figure below.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure A
Right & Left Chassis Installation
To install the Right Chassis (Item #1), first install (5) Small Tinnerman Clips (Item #4) to the Right side of the Chassis
Body. Then Align the Right Chassis' bolt holes with the Tinnerman Clips and secure the Right Chassis by using (7)
#10-12 x 1/2" Tinnerman Screws (Item #3). See Figure B.
To install the Left Chassis (Item #2), first install (5) Small Tinnerman Clips (Item #4) to the Left side of the Chassis
Body. Then Align the Left Chassis' bolt holes with the Tinnerman Clips and secure the Left Chassis by using (9) #10-
12 x 1/2" Tinnerman Screws (Item #3). See Figure C.
Note: Some parts and part features have been hidden from view for visual clarity.
Figure B
Installed Component Top
Figure C
7
Advertisement
Table of Contents
