Table of Contents
Advertisement
Chapter 7 Menu description tables
Variable
Item
range
TYPE A
For enabling or disabling the selection made
¢
/
for the BATTERY SELECT item.
¢: The selection is enabled.
/: The selection is disabled.
FULL
12.0
For selecting in 0.1 V steps the voltage at
:
which FULL is to be displayed.
15.0
:
17.0
NEAR END
11.0
For selecting in 0.1 V steps the voltage at
:
which the battery charge is to be considered
13.5
nearly depleted.
:
15.0
END
11.0
For selecting in 0.1 V steps the voltage at
:
which the battery charge is to be considered
11.9
depleted.
:
15.0
TYPE B
For enabling or disabling the selection made
¢
for the BATTERY SELECT item.
/
¢: The selection is enabled.
/: The selection is disabled.
FULL
12.0
For selecting in 0.1 V steps the voltage at
:
which FULL is to be displayed.
15.5
:
17.0
NEAR END
11.0
For selecting in 0.1 V steps the voltage at
:
which the battery charge is to be considered
13.1
nearly depleted.
:
15.0
END
11.0
For selecting in 0.1 V steps the voltage at
:
which the battery charge is to be considered
12.6
depleted.
:
15.0
7-8-5
Remarks
FRONT VR CH1
FRONT VR CH2
MIC LOWCUT CH1
MIC LOWCUT CH2
MIC LOWCUT CH3
MIC LOWCUT CH4
LIMITER CH1
LIMITER CH2
AUTO LEVEL CH3
AUTO LEVEL CH4
REC CH3/CH4
CUE REC SELECT
TEST TONE
MIC/AUDIO1
Variable
Item
range
FRONT
For setting whether or not to make the audio
W.L.
control operational for the input system
REAR
selected for CH1.
ALL
OFF
FRONT
For setting whether or not to make the audio
W.L. REAR
control operational for the input system
ALL
selected for CH2.
OFF
FRONT
For selecting the microphone low-cut filter for
REAR
CH1.
W.L.
OFF
FRONT
For selecting the microphone low-cut filter for
REAR
CH2.
W.L.
OFF
FRONT
For selecting the microphone low-cut filter for
REAR
CH3.
W.L.
OFF
FRONT
For selecting the microphone low-cut filter for
REAR
CH4.
W.L.
OFF
ON
For selecting the limiter for CH1.
OFF
ON
For selecting the limiter for CH2.
OFF
ON
For selecting the method used to set the level.
OFF
ON
For selecting the method used to set the level.
OFF
SW
For selecting the signals to be recorded for
CH1/2
CH3 and CH4.
SW:
The signals complying with the
position of the CH3/CH4 selector
switch on the side panel are recorded.
CH1&2: The same signals for CH1 and CH2
are recorded for CH3 and CH4. The
CH3&4 input circuit is set to the
power-saving mode.
CH1
For selecting the signals to be recorded for
CH2
the CUE channel.
CH3
CH4
CH1+CH2
CH3+CH4
NORMAL
For selecting the test signal.
ALWAYS
NORMAL: The test tone signal is output to all
OFF
the channels when the CAM/BAR
CHSEL
switch has been set to BAR and the
CH1 AUDIO IN switch has been set
to FRONT.
ALWAYS: The test tone signal is always output
to all the channels when the CAM/
BAR switch has been set to BAR.
OFF:
The test tone signal is not output.
CHSEL: The test tone signal is output to the
channels for which the CH1 or CH2
AUDIO IN switch has been set to
FRONT when the CAM/BAR switch
is set to BAR. It is not output to CH3
or CH4.
Remarks
7
97
Hide quick links:
Advertisement
Table of Contents
