Connecting The Power Cord - Canon BJC 3000 Reference Manual

Connecting the Power Cord

Plug the power cord into a power outlet securely.
Caution • Never use a power supply voltage and frequency other than standard
power supply provided in the country where you purchased the printer.
Using the incorrect voltage and frequency could cause fire or electric
shock. The correct power supply voltages and frequencies are as follows.
• For pluggable equipment, the power outlet should be near the printer and
should be easily accessible.
Important
• Never move the printer with the power cord still plugged into the power
outlet.
• Do not connect the printer to an outlet that is shared by other appliances.
If the power outlet is shared with other appliances such as an air condi
tioner, photo copier or fluorescent lamp, the electrical noise generated by
the appliance could cause printer malfunctions. You should also avoid
placing electrical appliances of this type close to the printer.
The power cord may be permanently attached to the printer, depending on
Note
the country of purchase.
Europe: AC 230V±10%, 50Hz
USA/Canada: AC 120V, 60Hz
Australia: AC 240V, 50Hz
Connecting and Switching On the Printer 20