Changing The Scanning Mode - Canon BJC 3000 Reference Manual

Changing the Scanning Mode

After IS Scan or IS Scan Plus is launched, it is necessary to change the settings according
to the image you wish to scan.
When using IS Scan Plus
Select the desired button under Scanning Mode. The optimum settings are
pre-registered based on the contents of a scanning job. (When you click one of
these buttons, it is marked by a large check mark to indicate the button is
selected. Click the button again to display a list of the pre-registered settings.)
When you select the Custom button, the Custom Settings dialogue box
Note
opens and allows you to adjust all the scanning settings for special scan-
ning jobs. For more details, refer to the on-line Help for IS Scan Plus.
Select the paper size in the
Paper Size box.
Using the Scanner 128