Connecting The Power Cord; Specifying The Network Settings - Canon Color imageCLASS LBP633Cdw Setup Manual

1 2
4.

Connecting the Power Cord

4
1
Specifying the Basic
5
Settings
When you turn on the machine for the first time, the
Setup Guide starts up on the operation panel. Perform
the initial machine setup by following the on-screen
instructions.
Operation panel
1.
Select the language, then the country/
region and finally the time zone.
2.
Set the current date/time.
3 4 5
2
3
6 7
Specifying the Security
6
Settings
Specify the basic security settings to prevent unauthorized
access to the machine.
1.
To use the Remote UI, select <Yes>.
To continue without using the Remote UI, select
<No> and proceed to step
2.
Check the explanation for using General
User mode and press
3.
To use General User mode, select <Yes>.
• Set the PIN to be used by general users to access
the Remote UI.
• To continue without using General User mode,
select <No> and proceed to step
4.
Set the Remote UI Access PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
Specifying the Network
7
Settings
Specify the settings for connecting the machine to a
network. Before proceeding, check that the computer and
router are correctly connected to the network.
Wireless LAN
1.
Check the router's "SSID" and "Network
key."
SSID
: XXXXXXXXXXXX
Network key
: XXXXXXXXXXXX
8 9
.
7
.
.
7
En
Fr
Es
Pt