Related Manuals for Aiphone Iai-100
Summary of Contents for Aiphone Iai-100
- Page 1 0505 A SECURITY WINDOW INTERCOM SYSTEM IMU-100, IAI-100, IAX-100, IME-100, ISE-100, IME-150 INSTALLATION & OPERATION MANUAL - 1 -...
-
Page 2: General Precautions
6. On products with ground terminals, connect to an earth ground. Fire or malfunction could result. 7. For DC powered systems, use Aiphone power supply model specified with system. If non-specified product is used, fire or malfunction could result. 8. In case of electrical storms, unplug the unit from AC outlet. If not, fire or electric shock could result. - Page 3 DR-100 AI-100 FF-100 Package contents (acoustic interface kit IAI-100) 1. Driver unit DR-100 2. Screws 3. Rubber seal 4. Acoustic I/O tube AI-100 5. Temporary installation jig 6. Tube fixer FF-100 7. Counter installation screw Package contents (gooseneck microphone IME-100) •...
-
Page 4: Installation
INSTALLATION Operator units [1] Main unit MU-100 Position under the desk. Can be installed with the mounting bracket provided. [2] Operation unit OU-100 Position on the left or right of the window desk, in a user- friendly location. [3] Power supply adapter PS-2420UL/2420S Position between the AC outlet and main unit in a location where it can be easily installed. - Page 5 Acoustic interface [1] Center of acoustic I/O tube [2] Customer [3] Barrier glass [4] Upper acoustic tube (2) [5] Upper acoustic tube (1) [6] Acoustic I/O tube [7] Lower acoustic tube [8] Driver unit [9] Tube fixer 1. Estimate the average height of customers, taking into account gender and age differences.
- Page 6 MOUNTING Main materials and tools 1. Main materials •Double-sided tape Select a tape suitable for your usage environment. Recommendation: 4910 (made by 3M) If you are using the acoustic tube system, cut a piece of tape approximately 50cm (20") longer than the total length of the tubes.
-
Page 7: Main Unit
Main unit Install the main unit under the counter or desk on the operator side. The cables from the other units will be connected at a later stage by temporarily removing the main unit. [1] Mounting bracket [2] Counter/desk [3] Switch [4] Front panel [5] Main unit [6] Terminal block... - Page 8 [10] [11] Not use connector [12] Blue Change [13] Blue [14] Blue Change [16] Not use connector [15] Blue Installation preparations for the acoustic interface [1] Fixing base [2] Slit plate [3] Microphone [4] Acoustic output [5] Acoustic tube main unit [6] Sound I/O opening [7] Driver unit [8] Cover...
- Page 9 Installation of the acoustic interface (driver unit) [1] Double-sided tape [2] Chassis [3] Set screws [4] Cable hole [5] Ceiling sash, etc. 1. The driver unit is connected to the top of the upper acoustic tube. Use the screws provided and double-sided tape to secure the chassis to the position where the glass meets the ceiling.
- Page 10 Installation of the acoustic interface (acoustic I/O tube) [1] Fixing base of the acoustic I/O tube [2] Fixing base of the lower acoustic tube 1. Remove the fixing base from the acoustic I/O tube main unit. 2. Attach double-sided tape to this fixing base. With the red label on the upper side, position the bottom of the fixing base of the acoustic I/O tube so that it makes contact with the top of the fixing base of the lower acoustic tube, which is already attached...
- Page 11 4-10 Acoustic interface wiring [1] Speaker cable from main unit [2] Microphone cable from main unit [3] Temporary installation jig [4] Acoustic I/O tube main unit [5] Microphone cord [6] Chassis [7] Cord groove 1. Pull the transmit output speaker cable and receive microphone input cable that come from the main unit on the operator side through the chassis cable hole in the driver main unit that is fixed to the glass.
- Page 12 4-11 Not use connector 10 mm Not use connector [10] [11] [12] to Main unit [14] from Acoustic tube [16] [15] [17] [10] [13] to Main unit (-) White (E) Shield (+) Black (+) Red from Acoustic tube Fixing of acoustic interface [1] Fixing base [2] Acoustic tube main unit [3] Connection groove...
- Page 13 4-12 (-) White (E) Shield from External mic. (+) Black from External speaker Outer microphone/speaker [1] Raceway [2] Optional microphone [3] Outer speaker 1. Attach the optional microphone with double-sided tape along the architectural sash. Clean the surface before attaching. Use a strong industrial double-sided tape that can attach aluminum and glass.
-
Page 14: Wiring Diagram
WIRING DIAGRAM IME-100 DR-100 E: Shield -: White +: Red H: Black C: White OU-100 MU-100 AI-100 IAX-100 ISE-100 +: Red SW: White -: Shield Page Speaker PS-2420UL / 2420S - 14 -... - Page 15 Wiring 1. Main unit MU-100 2. Operation unit OU-100 3. Gooseneck microphone IME-100 4. Driver unit DR-100 5. Acoustic I/O tube AI-100 and acoustic tube IAX-100 6. Power supply adapter PS-2420UL/2420S 7. Sensor ISE-100 8. Paging speaker (option) Suitable paging speakers have 4 to 6 Ω impedance and rated input of 3W or more, with a maximum input of 6W or more.
- Page 16 English Names NAMES [1] POWER LED (green) [2] TALK switch (orange) [3] VOL switch (orange) OU-100 [4] PAGE switch (orange) [5] Gooseneck microphone [1] [5] [6] Receive speaker [7] Headset connectors [8] POWER switch [9] VOX sensitivity knob [10] Transmit volume knob [11] Paging volume knob [12] Receive volume knob [13] Noise canceling control knob...
- Page 17 SETTING UP OU-100 MU-100 Setting up First, check that all the installation and wiring work has been completed, that all switches are off, and that all control knobs have been turned to the counterclockwise position. [1] Turn on the power supply adapter and turn on the POWER switch of the main unit.
- Page 18 OPERATIONS OU-100 [2][5] MU-100 Operation [1] Turn on the POWER switch of the main unit. The green lamp illuminates to show that electricity is being supplied and the system can be used. [2] Turn on the TALK switch of the operation unit. The orange lamp illuminates to show that communication is possible.
-
Page 19: Specifications
Directivity: Uni-directional Input sensitivity: -46 dB • Dimensions: 510 mm (length of gooseneck) • Weight: Approx. 190 g (0.42 lbs.) Specifications (acoustic interface kit IAI-100) • Operating temperature: 0 °C to 40 °C English • Acoustic output: • Microphone: • Material: •... -
Page 20: Warranty
This warranty does not cover batteries or damage caused by batteries used in connection with the unit. This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone. Aiphone will not be responsible for any costs incurred involving on site service calls.