Download Print this page

AeroGarden 100710-BSS Quick Start Manual page 8

Input voltage: 115v, 60hz, 1.5a

Advertisement

3
Starting Your Garden
A
Plug Cord into Electrical Outlet
What will happen...
1
A green light next to "Germination" and
a white light on Control Panel will illuminate.
2
Grow Bulbs will come on.
Look under Lamp Hood to check that both bulbs are lit.
If not
, check to see if:
• Grow Bulbs are properly inserted in Lamp Hood
(page 2, step 1C).
• Lamp Cord is plugged into Lamp Hood (page 2, step 1D).
• You are getting power through the electrical outlet.
3
When Pump starts* it may make a gurgling noise for a moment.
Lift View Door. You should see water dripping from the bottom
of Seed Pods into the Bowl.
If not
, check to see if:
• Lamp Arm is fully inserted into Base (page 2, step 1B).
• Bowl is firmly seated in Base (page 3, step 1F).
*Pump may take up to twelve hours to start.
note: You will hear water flowing until plant roots have grown to surface level of
water (a few weeks). Keeping water level in Bowl up to "Fill To Here" will help
reduce the sound of dripping water.
7
Plug in
view Door

Advertisement

loading

This manual is also suitable for:

Aerogarden pro100