Advertisement
Prepare For Your Next Garden
Replanting Your AeroGarden
If you have already grown a garden in your AeroGarden PRO
below to reset the nutrient timer:
• Press and hold "Reset" button until red "Add Nutrient" light blinks 3 or 4 times (about 9 seconds).
• Release "Reset" button. "Add Nutrient" light will turn off.
• Your AeroGarden is now reset.
worry about.)
note: these steps do not reset grow bulb timer.
Reset
Remember to...
• Replace Grow Bulbs after 6 months of use. Grow Bulbs can be ordered at
www.aerogardensupport.com or from your retailer.
• Sanitize AeroGarden PRO
• Set your Lamp Hood to lowest position when starting a new garden.
(In some cases you may see other lights blink as well. This is nothing to
Add Nutrient
before replanting (see page 13).
100
(continued)
, please follow the instructions
100
!
Bundle cord when furnishing is not in use.
14
Advertisement
