Table of Contents
Advertisement
Belkin (http://www.belkin.com)
F5D6230-3 – Wireless Cable/DSL Gateway Router
1. Log into your router using your router IP.
2. On the main page, select Virtual Server on the left side of the page under the
Securit section.
3. Enter the following information on the page:
Line #1:
Private IP:
Private Port:
Type:
Public Port:
Line #2
Private IP:
Private Port:
Type:
Public Port:
4. Click Enter to save the settings. WebCAM should now be configured to work with
your router and be accessible from the internet.
F5D7230-4 – 54g Wireless DSL/Cable gateway Router
1. Log into your router using your router IP.
2. On the main page, select Firewall on the left side of the page.
3. Under Firewall, select Virtual Servers.
4. Enter the following information on the page:
Line #1
Enable:
Description:
Internet Port:
Type:
Private IP address: Type in the camera's IP address. (Look on the WebCAM
WebCAM - user manual
Type in the camera's IP address. (Look at WebCAM IP
Address LCD display for the last 3 digits of the camera's IP
address)
80
TCP
80
Type in the camera's IP address. (Look at WebCAM IP
Address LCD display for the last 3 digits of the camera's IP
address)
9001
UDP
9001
Checked in
WebCAM - Webpage
80 to 80
TCP
Address LCD display for the last 3 digits of the camera's IP
address)
Appendix A: Router Configuration
-82-
Advertisement
Table of Contents
