Table of Contents
Advertisement
Chapter 3: Web Interface
Section 1. Introduction
WebCAM is designed to work without having to install any software.
necessary functions are built-into the unit.
1. Once you have finished the hardware setup shown in Chapter 2, note down the IP
address shown on the LCD
2. On a PC (located in the same LAN), open a Web Brower (eg.: Internet Explorer,
Netscape, Mozilla Firefox or Opera)
3. Enter the IP Address as shown on the WebCAM LCD display and press ENTER
4. A login screen will appear. Click Apply to login.
WebCAM - user manual
Fig.6 Enter WebCAM IP address
Fig.7 WebCAM Login screen
Chapter 3: Web Interface
All the
-5-
Advertisement
Table of Contents
