Table of Contents
Advertisement
Chapter 2: Hardware Installation
The following details the hardware installation procedure for WebCAM IP camera.
Step 1:
Connect the PC camera into the USB
port of WebCAM.
Step 2:
Connect the WebCAM to LAN by using
the Ethernet UTP port.
Step 3:
Connect DC power adapter output into
WebCAM socket, and plug the DC
power input into the wall socket
Step 4:
Wait a moment and the LCD will
display the IP Address, Subnet and
Gateway. Use a Browser to log into
WebCAM Web Interface
The
icon on the LCD shows that
a USB camera is connected.
The LCD display shows that two USB
cameras are attached to the WebCAM.
WebCAM - user manual
Chapter 2: Hardware Setup
-4-
Advertisement
Table of Contents
