Advanced Settings; Event Notification - 3Com iCV-01a User Manual

2.4 Advanced Settings

This section allows the Administrator to set up some of the features available in the
server.

2.4.1 Event Notification

2.4.2 Motion Detection
2.4.3 Image Recording
2.4.4 Email / FTP
2.4.5 System Settings
2.4.6 Image Server
2.4.7 Language
2.4.8 About
2.4.1 Event Notification
This section determines the type of event that will be included if an email notification is
sent by WebCAM.
Note:
Administrator privilege is required to configure this section.
i. Event Notification
A total of 8 email recipients can be assigned to receive notification.
Send Email
Select Yes to activate this feature. Default is No.
Email Server
A valid Email Server, User name and password must be setup for this feature to
work. If this has not been setup, click Edit and to go to Email / FTP setup page.
(see Section 2.4.4)
Note:
Email function can only work using standard Email Server and not Web based Email
Server, such as yahoo.com
Email Address Book
WebCAM - user manual
Fig.26 WebCAM Event Notification Page
Chapter 3: Web Interface
-26-