Image Server - 3Com iCV-01a User Manual

System Name
This is to give WebCAM a name identifiable in a SNMP network.
System Contact
This is to give the Administrator an identity in the SNMP network.
System Location
This is to set WebCAM SNMP location.
Manager IP Address
This set the LAN IP address where the administrator can manage WebCAM
from. It is valid for up to 8 different LAN IP addresses. To manage WebCAM
from any LAN IP addresses leave the field as *.*.*.*
Community
This is to set a Community name for NMS. The community name has to be the
same as that set in NMS.
Permission
This is to set the Administrator's authority. Options are Read, Read/Write, and
No Access.
Description
This is for an Administrator to make notes.

2.4.6 Image Server

The Image Server allows the user to view his camera directly from the internet without
having to set-up DDNS or Router's NAT. All the user has to do is log on to the
Server's webpage and register for free.
Once a username and password is registered and confirmed. The user can log into
this Server from anywhere in the world and access his camera.
WebCAM - user manual
Fig.50 SNMP Settings
Chapter 3: Web Interface
-40-