Instructions For Use - Waring X E Series Manual

WARING
WWD180X/200X Series
WW180X/200X Series
WMB400X/800X Series
WBW300X Series
BEFORE FIRST USE
1. These Waring
triple coated with Whitford
first use, we suggest you season the waffle grids by preheating
and then brushing them with cooking oil. Wipe with a paper
towel or pastry brush.
2. Remove any dust from shipping by wiping the plates with a
damp cloth. Remove all protective paper and wrapping.

INSTRUCTIONS FOR USE

1. Plug cord into wall outlet.
2. Switch the toggle switch to the ON position. The RED light will
illuminate to signal power.
3. Preheat your Waring
or preferred setting. It will now begin the preheating process.
This should take about 4 minutes. The machine will sound 6
beeps and the GREEN indicator light will go on to signal the
unit is ready for baking. Season the waffle grids by spraying
with cooking spray or brushing with a flavorless oil.
For initial use, it is important that the waffle maker is
preheated before seasoning with cooking spray or oil.
NOTE: The first time you use your waffle maker, it may have a slight
odor and may smoke a bit. This is normal, and common to heating
appliances.
4. Choose a setting on the browning control dial. For golden
brown waffles, we recommend using setting #4. When the
waffle is completely baked, the waffle maker will sound 3
beeps. Baking time is determined by browning level chosen.
COMMERCIAL WAFFLE MAKERS
®
Commercial Waffle Maker plates are
®
Commercial Waffle Maker on setting #4
®
Classic Waffle, 5/8" thick
Belgian Waffle, 1" thick
Mini Belgian Waffle, four 1" thick
Bubble Waffle
nonstick coating.* Before the
®
8