Operator Maintenance Mode And Replacement/Cleaning Mode - Canon imagePRESS C800 Series Operator's Maintenance Manual

1
Initial Setup > Basic Operation > Operator Maintenance Mode and Replacement/Cleaning Mode
Basic Operation
Operator Maintenance Mode and Replacement/
Cleaning Mode
To use the functions provided in Operator Maintenance mode, log in (enter the password) to
move to Operator Maintenance mode.
When replacing/cleaning the parts, move to Replacement/Cleaning mode in Operator
Maintenance mode.
The figure below shows the relation between Operator Maintenance mode and Replacement/
Cleaning mode.
Press [Settings/Registration].
General Screen
Setting/
Press [Adjustment/Maintenance] >
Registration [Operator Maintenance] >
[Operator Maintenance Mode].
Screen
Operator
Password
Maintenance
Input Screen
Mode
Operator
Maintenance
Basic Screen
Replacement/ Replacement/
Cleaning Screen
Cleaning
in Operator
Mode
Maintenance Mode
Operator
Maintenance
Basic Screen
Setting/
Press [End].
Registration
Screen
Press [Close].
General Screen
1 Initial Setup > Basic Operation > Operator Maintenance Mode and Replacement/Cleaning Mode
Enter the password
and press [OK].
Press
[Counter Operation].
Press [Replacement/
Cleaning].
Counter
Press [Counter
Operation
Operation].
Screen
Press [End Rplcmt./
Cleaning].
Clearing the counter
F-1-1
1-2
1-2