Table of Contents
Advertisement
ADVANCED FUNCTIONS
4. Enter the location in the same way as
for a destination search, or display the
map of the area to be avoided. (See "Des-
tination search" on page 42.)
5. Set the cursor
in the center of the
area to avoid, and touch "Enter".
96
6. Touch either
or
to change
the size of the area to be avoided.
7. Touch "OK".
INFORMATION
D If a destination is input in the area to
avoid or the route calculation cannot
be made without running through the
area to avoid, a route passing through
the area to be avoided may be shown.
D Up to 10 locations can be registered
as points/areas to avoid. If there are
10 locations already registered, the
following message will be displayed:
"Unable to register additional points.
Perform operation again after delet-
ing unnecessary points.".
— Editing area to avoid
The name, location and/or area size of a reg-
istered area can be edited.
1. Push the "MENU" button.
2. Touch "My Places".
3. Touch "Edit".
4. Touch the desired area button.
Advertisement
Table of Contents
