Setting And Deleting Destination; Adding Destinations - Toyota Sienna 2008 Manual

2. Touch the number button to display
the desired destination.
The distance, the estimated travel time and
the estimated arrival time from the current
position to the selected destination are dis-
played.
Estimated travel time is displayed.
Estimated arrival time is dis-
played.
To switch to estimated arrival
time.
To switch to estimated travel time.
Displayed while driving off the
guidance route. The destination
direction is indicated by an arrow.
INFORMATION
When the vehicle is on the guidance
route, the distance measured along the
route is displayed. Travel time and arriv-
al time is calculated based on the set ve-
hicle speed information. (See page 101.)
However, when the vehicle is not on the
guidance route, the distance is the linear
distance between the current position
and the destination.
ROUTE GUIDANCE
Setting and deleting
destination —

— Adding destinations

Adding destinations and searching again for
the routes can be done.
1. Touch "Route".
2. Touch "Add".
71