Table of Contents
Advertisement
BASIC FUNCTIONS
After the screen is scrolled, the map remains
centered at the selected location until another
function is activated. The current vehicle
position mark will continue to move along
your actual route and may move off the
screen. When the "MAP/VOICE" button is
pushed, the current vehicle position mark re-
turns to the center of the screen and the map
moves as the vehicle proceeds along the des-
ignated route.
INFORMATION
When the one−touch scroll feature is
used, the current vehicle position mark
may disappear from the screen. Move
the map with a one−touch scroll again or
push the "MAP/VOICE" button to return
to the current vehicle position map loca-
tion display.
28
D
To set the cursor position as a destina-
tion
A specific point on the map can be set as a
destination using the one−touch scroll func-
tion.
Touch "Enter
".
The screen changes and displays the map
location of the selected destination and the
route preference. (See "Starting route guid-
ance" on page 61.)
If there is already a set destination, "Add to
" or "Replace
" are displayed.
": To add a destination.
"Add to
": To delete the existing destina-
"Replace
tions and set a new one.
D
To register the cursor position as a
memory point
Memory point registration enables easy ac-
cess to a specific point.
Touch "Mark".
When you touch "Mark", the following screen
appears for a few seconds, and then the map
screen returns.
Advertisement
Table of Contents
