ADVANCED FUNCTIONS
4. Touch either
or
to adjust the di-
rection of the current vehicle position
mark.
5. Touch "Enter".
The map screen will be displayed.
108
TIRE CHANGE CALIBRATION
The tire change calibration function will be
used when replacing the tires. This function
will adjust the mis−calculation caused by the
circumference difference between the old
and new tires. If this procedure is not per-
formed when tires are replaced, the current
vehicle position mark may be incorrectly dis-
played.
To perform a distance calibration proce-
dure, touch "Tire Change" on the "Cal-
ibration" screen.
The message appears and the quick distance
calibration is automatically started. A few
seconds later, a map screen will be displayed.