Table of Contents
Advertisement
D
Presetting a channel
1. Tune in the desired channel.
2. Touch one of the channel selector but-
tons (1 — 6) and hold it until a beep is
heard.
This sets the channel to the touch screen but-
ton and the name and number of the channel
appears on the touch screen button.
Each touch screen button can store three
SAT channels. To change the preset channel
to a different one, follow the same procedure.
The preset channel memory is cancelled
when the power source is interrupted by bat-
tery disconnection or a blown fuse.
D
Selecting a channel
Tune in the desired channel using one of the
following methods.
Preset tuning: Touch the channel selector
button (1 — 6) for the channel you want. The
button (1 — 6) is highlighted and channel
number appears on the display.
To select channel within the current cate-
gory: Push the "
" or "
" button of
"SEEK·TRACK". The radio will step up or
down the channel within the current channel
category. Touch "TYPE SEEK". The radio
will step up the channel within the current
channel category.
AUDIO/VIDEO SYSTEM
To scan the currently selected channel
category: Touch "TYPE SCAN" or push the
"SCAN" button briefly. "SCAN" appears on
the display. The radio will find the next chan-
nel in the same channel category, stay there
for a few seconds, and then scan again. To
select a channel, touch "TYPE SCAN" or
push the "SCAN" button a second time.
To scan the preset channels: Push the
"SCAN" button and hold it until you hear a
beep. "P.SCAN" appears on the display. The
radio will find the next preset channel, stay
there for a few seconds, and then move to the
next preset channel. To select a channel,
push the "SCAN" button a second time.
Finish
181
Advertisement
Table of Contents
