Setting And Deleting Destination; Adding Destinations - Toyota TNS 510 User Manual

ROUTE GUIDANCE
The distance, the estimated travel time
and the estimated arrival time from the
current position to the selected destination
are displayed.
Estimated travel time is displayed.
Estimated
displayed.
To switch to estimated arrival time.
To switch to estimated travel time.
Displayed while driving off the
guidance route. The destination
direction is indicated by an arrow.
INFORMATION
When the vehicle is on the guidance
route, the distance measured along
the route is displayed. Travel time
and arrival time is calculated based
on the set vehicle speed information.
(See page 102.) However, when the
vehicle is not on the guidance route,
the distance is the linear distance
between the current position and the
destination.
70 TNS 510
arrival time
Setting and deleting
destination —

— Adding destinations

Adding destinations and searching again
for the routes can be done.
is
1. Touch "Route".
2. Touch "Add" of "Destination".
3. Input an additional destination in the
same way as the destination input.
(See "Destination search" on page 42.)
4. Touch the desired "Add" to determine
the arrival order of the additional
destination
3E5009G
3E5010G
3E5011G