Zte ZXHN H298Q User Manual page 10

Indicator Status
Off
Flashing green
Solid green
Internet
Solid red
Off
2.4GHz Flashing green
On
Off
Flashing green
5GHz
On
Off
Slow Flashing
green
Fast Flashing
WPS
green
Fast OverLap
Flashes
On
Description
No detected data.The ZXHN H298Q is powered off.
Currently in data transmission.
The WAN connection is online.
The device has a WAN IP address from IPCP,
DHCP or statically configured. LED remains green
in the case of disconnection due to idle timeout
when PPP dial-on-demand is enabled. Green LED
indicates that the routing connection state is up.
The WAN connection is dialing up or fails to get
online.
Device attempted to become IP connected and
failed (no DHCP response, no PPPoE response,
PPP authentication failed, no IP address from IPCP,
etc).
2.4GHz WLAN RF switch is off.
Currently in data transmission. Flashing frequency
indicates 2.4GHz Wi-Fi network traffic.
2.4GHz WLAN RF switch is on.
5GHz WLAN RF switch is off.
Currently in data transmission. Flashing frequency
indicates 5GHz Wi-Fi network traffic.
5GHz WLAN RF switch is on.
No WPS access or the WPS access of the terminal
exceeds 5 minutes.
WLAN terminal is in WPS accessing process.
The WPS accessing of the WLAN terminal is Faulty.
Session Overlap Detected.
WPS function is on.