Setting Up Documents; Placing A Document On The Platen Glass - Canon PC-D340 Quick Reference Manual

Setting Up Documents

For scanning, place your documents on the platen glass or load them into the ADF. Where you set up your
documents depends on the size and type of documents you have. (→ p. 3-1)

Placing a Document on the Platen Glass

1
Open the platen glass cover.
2
Place your document face down on the platen glass. Align the document with the appropriate
paper size marks.
3
Gently lower the platen glass cover.
• The document is now ready for scanning.
Positioning Documents
Use the size indicators on the left side of the platen glass to position a document.
I If your document conforms to a standard paper size (e.g., A4 or A5), align the document between the
appropriate paper size marks.
I If you do not know the size of your document, or if your document does not match any of the paper size
marks, align the centre of your document with the ➔ mark.
3-2